Practical Guide
Safety & Proper Handling of the SATAminijet 4400 B
The SATAminijet 4400 B is a precision tool. To work safely and reliably, safety warnings and handling regulations must be strictly observed. Here are the key points from the operating manual.
Important Safety Warnings (Chapter 2)
- Use the spray gun only in well-ventilated areas – paint mist is hazardous to health.
- Never point at people or animals – compressed air can cause serious injury.
- Before any disassembly: disconnect the spray gun from the air supply and release pressure.
- Use only original spare parts and accessories – safety-critical parts may otherwise fail.
- Maximum permissible inlet pressure: 10 bar – higher pressures damage components and compromise safety.
Safety Facts at a Glance
| Area | Guideline / Note |
|---|---|
| Max. Inlet Pressure | 10 bar |
| Spare Parts | Use only original SATA parts |
| Cleaning | Always disconnect air supply before cleaning |
| Work Environment | Only in ventilated areas, with respiratory protection & PPE |
| Hazard from Compressed Air | Never direct at skin, eyes, or ears |
Tip: Always wear safety glasses, gloves, and a respirator during any painting process. Even with small spot repairs, aerosols are generated that can only be safely blocked with PPE.
Safe Handling in 5 Steps
- Operate the spray gun only at the designated air connection with clean compressed air.
- Always release pressure and disconnect the spray gun before assembly or cleaning.
- Install nozzle set and air distribution ring only with the appropriate tools.
- Regularly check and tighten all screw and sealing elements.
- Do not attempt self-repairs in case of defects – use original parts or contact professional service.
Get the Right Spare Parts & Accessories
Conclusion
Safety comes first when painting with the SATAminijet 4400 B. Those who observe the safety warnings, never exceed the maximum pressure of 10 bar, and use only original parts will work not only efficiently but also reliably and without accidents.
