Practical Guide
SATAminijet 4400 B: Compact Professional for Spot Repair & Precise Small Parts
How to paint small surfaces cleanly, quickly, and VOC-compliantly with the SATAminijet 4400 B (HVLP & RP) – including reference values, workflow, and troubleshooting.
Two Technologies
HVLP = high transfer efficiency, RP = maximum working speed.
RPS/QCC Compatible
QCC connection, RPS multipurpose cups, and SATA adam compatible.
SR Nozzles for Spot Repair
Wide, “soft” fading core area for invisible blending zones.
Variants & Key Data
| Variant | Recommended Gun Inlet Pressure* | Recommended Spray Distance* | Air Consumption (Reference) | Available Nozzle Sizes (Excerpt) |
|---|---|---|---|---|
| HVLP / HVLP SR | approx. 2.0 bar (Spot Repair: 0.5–2.0 bar*) | 12–15 cm* | ≈ 120 Nl/min | 0.3 / 0.5 / 0.8 / 1.0 / 1.1 / 0.8 SR / 1.0 SR / 1.2 SR / 1.4 SR |
| RP / RP SR | approx. 2.5 bar (Spot Repair: 0.5–2.0 bar*) | 12–19 cm* | ≈ 200 Nl/min | 0.5 / 1.4 / 1.6 / 0.8 SR / 1.0 SR / 1.2 SR / 1.3 / 0.3 SR / 1.3 SR |
*Reference values from the operating manual; fine-tune depending on material, density, and viscosity. Max. gun inlet pressure: 10 bar.
Tip: For precise pressures, use a gun pressure gauge (e.g. SATA adam 2 mini). Without a gauge, a rule of thumb is: for every 10 m hose (Ø 9 mm), add approx. +0.6 bar at the pressure regulator to reach the desired gun inlet pressure.
